Rokonet Orbit-6 Instrukcja Użytkownika Pobierz pdf (Strona 22)

User Manual

DISARMING AN ARMED SYSTEM AND/OR SILENCING AN ALARM

IN PROGRESS

STEP DESCRIPTION

If outside the premises, open an "entry" door; the keypad(s) will

beep indicating that the Entry Delay period has begun.

Disarming an armed system

Before the Entry Delay expires, enter the four digits of your

User Code.

NOTE: If you make a mistake when entering your User Code,

the keypad will produce three short beeps. If so, re-enter the

above sequence correctly.

Silencing an alarm in progress

Observe the keypad. If any of the following conditions is evident,

an alarm has occurred:

·• the ARM LED is flashing

·• a Zone LED is lit steadily

·• the FIRE LED is lit steadily

Disarm the system by entering your User Code:

It's best to enter the premises only after police or a security

company has investigated and you feel confident that the burglar

is no longer on your premises.

IMPORTANT!

If the alarm was caused by a tripped Smoke Detector(s), the

keypad's FIRE LED will remain lit—providing an indication that

the fire system must be reset before it will be capable of

detecting subsequent alarms. Furthermore, until reset, you will

be prevented from arming your system.

To reset the fire system and to turn off the FIRE LED, refer to

Activate a Utility Output/Reset Smoke Detectors, in the table on

page 25.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Brak uwag

Rokonet Orbit-6 Instrukcja Użytkownika Strona 22