Rokonet ORBiT-14 Instrukcja Użytkownika Pobierz pdf (Strona 3)

Installation and Programming Manual

Expansion Bus

Through the ORBIT-Pro’s 4-wire BUS, which can be run up to 1000 feet, a variety of features and enhancements

are made possible through the use of the appropriate Expansion Module(s). Incorporating any module into the

system is accomplished by its simple connection to the system's BUS, as suggested by 2-6 on page 24.

Programmable (Utility) Outputs

An “open-collector” transistor output has been incorporated into the ORBIT-Pro’s Main Panel to help operate an

external device in response to a number of system activities related to alarms, zones, partitions, the actions of a

particular user, or scheduled events based on the system’s internal clock.

A door-strike, a CCTV Time Lapse recorder, an “intermediate relay” will be necessary (see page 8 for additional

information).

When more output flexibility is required, this single output can be augmented through the use of two types of

Programmable Output Expansion Modules:

• the 4-output relay module (using four programmable Form C relays)

• the 8-output switching module (using eight open-collector transistor outputs)

X-10 Module (Not for UL Installations)

The ORBIT-Pro also supports the connection of an X-10 Transmitter Module to its 4-wire Expansion Bus. X-10

technology converts the ORBIT-Pro’s programmable output events into a protocol understood by the Transmitter

Module. When so triggered, this module generates activation and control signals along existing AC premises wiring

to the appropriate X-10 Receiver Modules–appropriately placed and connected within the premises to control

lighting and appliances. X-10 Transmitter Modules are available for the ORBIT-Pro supporting either 8 or 16

premises Receiver Modules.

Digital Communicator / “Follow-Me” Mode

The ORBIT-Pro's on-board Digital Communicator is capable of numerous transmission formats, including

ADEMCO Contact ID and SIA. It can process up to 8 account numbers (i.e. one for each partition) and store up to

three Central Station phone numbers–should multiple or split reporting be utilized. In addition to standard

communication with the monitoring station, the ORBIT-Pro employs a Follow-Me feature, in which a phone call can

be made–using tones to represent the active alarm (e.g. burglary or fire)–to a designated phone number. This

feature is available for each partition and is generally useful for informing a homeowner at work, or a business

owner at home, that there has been an alarm at a specific premises.

With the optional Digital Voice Module, it's possible to record a short message, which replaces the alarm tones

normally produced in the Follow-Me mode.

The communicator also offers a "batch" mode from which non-urgent reports can be collected over a designated

time period, and then transmitted all at once. The communicator also supports daily system testing, along with

reports of entry into (and exit from) the system's Installer Programming mode.

Finally, a Paging Feature is available through the Follow-Me mode. If selected and programmed to do so, ORBIT-

Pro messages containing the following information can also be sent to a user’s numeric or alphanumeric pager :

partition-based opening and closing signals and/or partition-based alarm signals

Power Supply Expansion

Although the ORBIT-PRO’s Main Board provides 600 mA of auxiliary power, 250 for Switch Aux and 900 for Bell,

the use of a number of additional system modules and detectors will likely exceed this limitation. As a result, the

ORBIT-Pro permits the addition of up to eight remoteable Power Supply Expansion Modules, each operating from

AC power and connected to the 4-wire BUS.

Each such module provides a total current capacity of 1.5 amperes and has connections for powering auxiliary

devices and triggering either bell(s), electronic siren(s), or loudspeaker(s) during an alarm. Each Power Supply

Module also supports its own standby battery, and is supervised for the loss of AC, a Low Battery condition, the

failure of its auxiliary output power, and the loss of sounder loop integrity.

Digital Voice Module (Not for UL Installations)

The Digital Voice Module is an unique component, which provides two useful services. It permits premises’

telephones and/or cellular phones to act as keypads, and/or it can also equip the ORBIT-Pro for Central Station

two-way listen-in capability. It's also used to enhance the aforementioned Follow-Me feature, already described.

1 2 3 4 5 6 7 8 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Rokonet ORBiT-14 Instrukcja Użytkownika Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Rokonet ORBiT-14