Rokonet ORBiT-14 Instrukcja Użytkownika Pobierz pdf (Strona 52)

Installation and Programming Manual

ZONES: ZONE TYPE (cont’d)

Quick Key Item Default Explanation

ZONE TYPE (cont’d)

12 Day ---

§ usually assigned to an infrequently-used door, a

movable skylight, and, if used, to window foil protecting

non-movable glass

§ its intent is to alert the system user if a violation occurs

during the disarmed period

§ if the system is armed (to either AWAY or STAY):

a violation of this zone causes an immediate intrusion

alarm (after the expiration of the Exit Delay period)

§ if the system is disarmed:

a violation of this zone attempts to alert the user by

causing the POWER LEDs on all keypads to flash

rapidly–directing the user to view the system’s

TROUBLE indications

§ optionally, such a violation can be reported to the

Central Station as a Zone Trouble (see page 89)

13 24 Hours ---

§ usually assigned to protect non-movable glass, fixed

skylights, and (possibly) for shock detection systems

§ a violation of such a zone will always cause an instant

intrusion alarm, regardless of the system’s state

14 Fire --- § intended for smoke or other types of fire detectors; can

also be used for manually-triggered panic buttons or

pull stations (if permitted)

§ if violated, will cause an immediate fire alarm.

§ a fault in the wiring to any fire zone, if supervised, will

cause a Fire Trouble, manifested by a rapid flashing of

the keypads’ FIRE LED

15 Panic ---

§ generally used for external panic buttons and wireless

panic transmitters

§ if violated, an immediate panic alarm will be

annunciated

16 Auxiliary emergency ---

§ generally used for external auxiliary emergency-alert

buttons and wireless auxiliary emergency transmitters

§ if violated, an immediate auxiliary emergency alarm will

be annunciated

17 Key Switch ---

§ If desired for system arming and disarming, connect an

external SPST spring-loaded momentary-action

keyswitch to any zone terminals given this designation

18 Exit Termination ---

§ generally used to avoid false alarms due to a user’s

exiting from the premises after the Exit Delay time has

elapsed

2 3 xx

19 Latch Keyswitch ---

§ If desired for system arming and disarming, connect an

external SPST latching-type (non-momentary)

keyswitch to any zone terminals given this designation

20 Entry Follower + Stay ---

§ usually assigned to motion detectors and to interior

doors protecting the area between the entry door and

the keypad

§ when the system is armed to the STAY mode, a

zone(s) given this designation will behave like an

Entry/Exit zone, in that it is subject to the Entry and Exit

Delays specified under Exit/Entry 1 (in the System/Time

Define section)

§ when the system is armed to the AWAY mode, a

zone(s) given this designation will behave like an Entry

Follower Zone, in that it will cause an immediate

intrusion alarm when violated unless an Entry/Exit zone

was violated first

§ if so, an Entry Follower + Stay zone(s) will remain

bypassed until the end of the Entry Delay period

INSTALLER PROG:

2)ZONES ↓↓

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Rokonet ORBiT-14 Instrukcja Użytkownika Strona 52

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Rokonet ORBiT-14