Rokonet ORBiT-14 Instrukcja Użytkownika Pobierz pdf (Strona 56)

Installation and Programming Manual

ZONES: LABELS

Quick Key Item Default Explanation

2 8

LABELS

ZONE 01

ZONE 02

ZONE 03

ZONE 04

etc.

§ allows for the creation and/or editing of up to 10-

characters describing each of the system’s zones

a) from this display, press [ENTER] to allow for zone

labeling

b) from this display, press [ENTER] to label Zone 1;

alternatively, you can enter another zone number

c) to assign the name of “Mary’s Bedr” to Zone 1, refer

back to the material on page 30 and to these steps:

§ press the [1] key repeatedly until an M

appears in the display;. press the DOWN-

arrow (BYP) key once to move the cursor to

the right

§ press the [4] key until an a appears in the

display; again, press the DOWN-arrow to

advance the cursor

§ press the [5] key repeatedly until an r

appears; press the DOWN-arrow to advance

the cursor

§ press the [5] key repeatedly until a y

appears; press the DOWN-arrow to advance

the cursor

§ press the [3] key repeatedly until an

apostrophe appears; press the DOWN-

arrow key

§ press the [5] key until an s appears

§ press the [6] (or [7], [8], [9], or [0]) key to

create a space and press the DOWN-arrow

to advance the cursor

§ begin the next word with a B, by pressing the

[1] key as required

§ continue this procedure and when done,

press [ENTER] to go on to the next zone;

repeat this procedure, as required, to label

other zones in the system

d) once done, press the [SS] key to exit the labeling mode

INSTALLER PROG:

2)ZONES ↓↓

SUBJECT: ZONES

8)LABELS ××

ZONE LABEL:

ZONE#=01 (00:01)

ZONE LABEL: 01

ZONE 01

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Rokonet ORBiT-14 Instrukcja Użytkownika Strona 56

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Rokonet ORBiT-14