Rokonet ORBiT-14 Instrukcja Użytkownika Pobierz pdf (Strona 46)

Installation and Programming Manual

SYSTEM: SYSTEM LABEL

Quick Key Item Default Explanation

1 5 SYSTEM LABEL

---

Creates and Edits System and Partition Labels

1 5 0 Global

ROKONET

Allows editing of the global (system) label

1 5 1

through

Partitions 1 through 8

PARTITION 1

PARTITION 2

PARTITION 3

PARTITION 4

PARTITION 5

PARTITION 6

PARTITION 7

PARTITION 8

Allows editing of the label used to name each partition

EXAMPLE: To assign the name of “The Jones’s” to

Partition 1, follow these steps:

a) at the display below, press [ENTER]

b) press the [2] key repeatedly until a T appears in

the display; press the DOWN-arrow (BYP) key once to

move the cursor to the right

c) press the [4] key repeatedly until an h appears in the

display; again, press the DOWN-arrow to advance the

cursor

d) press the [4] key repeatedly until an e appears and press

the DOWN-arrow key to advance the cursor

e) press the [6] (or [7], [8], [9], or [0]) key to create a space

and press the DOWN-arrow to advance the cursor

f) press the [1] key until a J appears

use the elements of this procedure to assign other

Partition Labels–each of which may contain up to

12 characters.

1 6 TAMPER SOUND Sets the Sound(s) Produced by a Tamper Violation of a

Keypad and/or an Expansion Module

1 6 1

through

BELL/A

BUZZER/D

(5)

1- Silent

2- Bell (External Sounder) Only

3- Buzzer (Keypad Piezo) Only

4- Bell + Buzzer

5- Bell/A Buzzer/D

§ if the system was armed when the Tamper Violation

occurred, the Bell (External Sounder) will operate

§ if the system was disarmed when the Tamper Violation

occurred, the keypad will annunciate

SYSTEM: DEFAULT ENABLE/DISABLE

1 7 DEFAULT

ENABLE/ DISABLE

Relates to What Happens if the Main Board’s DEFAULT

(J2) Jumper is in Place When All Power to the Panel is

Reapplied after Being Removed:

1 7 ENABLE

§ if ENABLE is selected: the panel will lose its previously

programmed configuration, including all Labels and

User/Installer Codes. It will return to its original, factory-

defaulted configuration from which it can be

reprogrammed by anyone who knows the default User

and Installer Codes

§ if DISABLE is selected: the system will be prevented

from being modified by an unauthorized person; thus,

the panel will maintain its previously-programmed

configuration, keeping all Parameters, Labels, and

User/Installer Codes intact. As with any instance of a

total loss of power, it will be necessary to reset the

system’s TIME and DATE

SYSTEM LABELS:

1)PARTITION 1

INSTALLER PROG:

1)SYSTEM ↓↓

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Rokonet ORBiT-14 Instrukcja Użytkownika Strona 46

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Rokonet ORBiT-14